The painted steel cylinder is filled with 1300g of CO2, that is a little more than 2.8 pounds. This gas source is a reliable alternative to refillable 5lbs and 10lbs Co2 tanks that you must drive around to get refilled.
Draft beer service, carbonation and aquatic plant culture are just a few of the many uses for this sized CO2 cylinder. We have made it easy for you to get CO2 gas delivered right to your door.
Once empty, you can offer the steel cylinder for recycling depending on your local requirements.
Compatibility (tab)
The beverage grade CO2 in our cylinder is ready for human consumption and is also fitting for aquatic plant landscapes. The brass alternative used in our valves is a low lead content material designed to comply with the California Prop 65 guidance as of August 2025.
We offer pressure reducing gas regulators to control the CO2 pressure to a useable level. Our sales team is very good at guiding you if you are unsure what to select. We have also developed a CGA320 Kit for connecting this cylinder to your existing CGA320 regulator that has a female CGA320 threaded end.
With the CGA320 kit you get instant compatibility with kegerators, beer draft equipment, carbonation equipment, soda dispensing devices and most Aquatic bubble systems.
WARNING: CO2 is a high pressure gas and extreme caution must be taken when connections are made and the gas is allowed to flow. High pressure gas can cause serious injury. If you are not sure, do not make a connection.
Our CO2 cylinders are heavy and care must be taken to prevent them from falling or tipping over especially when a regulator or valve is attached as the cylinder can become a deadly projectile if the neck were to snap off. Strap the cylinder to a wall or solid object to prevent accidental tip over.
CO2 can fill a room and cause asphyxia which can cause death. Do not use equipment that leaks. Remove it from an interior space and allow it to vent outdoors